Aricle Index: 014
BTL
- Barrier – slide-insert
- Ideal where space is a problem
- Designed for installation within the jamb
|
Dimensions |
|
|
Standard height: |
100–350 mm |
|
Standard length: |
750–6000 mm |
|
Special situations: |
upon request |
|
Width: |
50 mm |
Suitable for crack-free surfaces with up to 15 mm (± 7.5 mm) of floor/ground unevenness, e.g. concrete, corrugated sheet metal, tiles, stones, etc.
The Doorway Spill Barrier is comprised of a rectangular, integral hollow aluminium profiled body. A compressible, highly adaptable special seal is affixed to the lower side.
The barrier mounts are “U”-shaped and are particularly narrow in their design. By way of preference, they are securely and universally mounted within the jamb of a door/gate, between walls, etc. and tightly sealed against the building or structure. Mounting outside of the doorjamb is likewise possible by means of special accessories.
Attached to the closure barrier are two tensioning levers with which the necessary force is applied for securing and sealing in the guiding tracks and against the floor/ground. A tight and secure seal is ensured in this manner. The tensioning force is adjustable. The tensioning levers lock into place.
Wall mounts are included in the product package to provide for orderly storage.
Barrier bodies and mounting fixtures are furnished with a red paint finish, preferably “traffic red” RAL 3020. The remaining metal components are galvanized or made of aluminium.
